If done right. The color layer is under two coats of aliphatic polyaspartic. That is the coat Arizona sun hits. Epoxy left bare will amber. This build does not leave it bare, which is why flake and metallic stay the color they were poured.
Yes, on a covered patio. The slab has to be sound, and the exposure has to be shade most of the day. An open drive or a pool deck is a different job. We will say so rather than coat a slab the system is wrong for.
The published ranges are per square foot. A standard flake floor in Phoenix is typically $5 to $8. Our flake systems are typically $8 to $10, and metallic is typically $12 to $16. The proposal is written after moisture, existing coatings, and crack repair are reviewed.
Absolutely. Dust mop, wipe spills, and a damp mop with a neutral cleaner. Felt pads under furniture. No grit pads and no solvent. The topcoat is the wear surface, so it does not need a wax.
No. A chip or a worn patch is ground back to clean concrete and rebuilt into the existing topcoat. The rest of the floor stays.
Fastidious Coatings